DELTA OHM – MÁY ĐO ĐỘ RUNG DELTA OHM HD2070.HA-WB VỚI BỘ GIA TỐC CHO QUÁ TRÌNH ĐO Model: HD2070.HA-WB

DELTA OHM – MÁY ĐO ĐỘ RUNG DELTA OHM HD2070.HA-WB VỚI BỘ GIA TỐC CHO QUÁ TRÌNH ĐO

Model: HD2070.HA-WB

Code: HD2070.HA-WB

Hãng sản xuất: DELTA OHM – Ý

 

Thông số kỹ thuật máy đo độ rung DELTA OHM HD2070.HA-WB:

§  Kit for 3-axis measurement of the vibrations transmitted to the hand-arm system and to the whole body with rubber pad for the measurement of the vibrations transmitted through seats and backs.

§  The kit includes the 3-channel vibration analyzer HD2070 and two tri-axial accelerometers with seat pad.

§  The kit INCLUDES the adapters for the mounting of the accelerometer for hand-arm measurements.

Bộ thiết bị đo độ rung DELTA OHM HD2070.HA-WB:, bao gồm:

§  HD2070: 3-axis vibration analyzer with data logging and storing of vocal comments. Includes:

• Silicone grease(HD6188), wax (HD6273) and glue (080A90) for accelerometers.
• 2 GB SD memory card (HD2030MC)and USB serial cable (CP22) for the connection to PC. Alternatively, the
• HD2110CSNM cable for RS232 (COM type) serial ports canbe supplied on request.
• “Noise Studio” software for PC with Windows® operating systems, user manual and carrying case.
• Calibration reports as vibration analyzer according to ISO 8041.

§  HDP356B41 IEPE: tri-axial accelerometer with 100 mV/g sensitivity: for the measurement of the vibrations transmitted  to the whole body (range ±10 g, weight 13 g approx.) integrated in a rubber pad for the measurement of the acceleration transmitted through the seat and back. Includes:

• 270 g rubber pad for the measurement of the acceleration transmitted through the seat and back with 3 m HD2030.CAB3-3Mcable (other lengths on request) for the connection to the input of the 
• Manufacturer calibration documentand  ISO 9001 calibration reportof the vibration analyzer – accelerometer chain with filters Wd, Wd, Wk respectively for the axes x, y and z.

§  HDP356A02 IEPE tri-axial accelerometer with 10 mV/g sensitivity: for the measurement of the vibrations transmitted  to the hand-arm system (range ±500 g, weight 10 g approx.). Includes:

• The 10-32 UNF and M6 mounting screws made of copper-beryllium alloy (081B05and M081B05).
• HD2030.CAB3-3M: 3m cable (other lengths on request) for the connection to the right input (tri-axial)  of the HD2070 analyzer.
• Manufacturer  calibration documentand  ISO 9001 calibration reportof the three axes of the vibration analyzer – accelerometer chain with filter Wh.

§  Accelerometer mounting adapters (HD2030.124) for hand-arm measurements. Includes:

• HD2030.AC1: cube-shaped adapter for anatomical handles and small size tools. To be fastened with plastic cable-tie or metallic clamp (included) to the handle.
• HD2030.AC2: adapter for cylindrical handles. The accelerometer is placed laterally with respect to the hand.

HD2030.AC4: general use adapter. The accelerometer is placed  between the forefinger and the middle-finger or between the middle-finger and the ring-finger of the hand.